This fifth cleanup pass follows issue #314 with another homogeneous, low-risk slice: three LogoV2 notice/upsell components that each only surfaced a single unused React import warning. Removing just those imports keeps the series moving without mixing in broader cleanup categories.
Constraint: Keep pass 5 to files with the same single-warning pattern
Rejected: Fold in unrelated LogoV2 files with wider warnings or other cleanup shapes | would make the pass less uniform and less reviewable
Confidence: high
Scope-risk: narrow
Reversibility: clean
Directive: Continue preferring single-pattern micro-passes when the compiler output presents them clearly
Tested: bun run build; bun run smoke; targeted noUnused grep for touched files via bun x tsc --noEmit --noUnusedLocals --noUnusedParameters --pretty false
Not-tested: full repo typecheck (broader baseline noise remains outside this pass)
Co-authored-by: anandh8x <test@example.com>
This fourth pass continues issue #314 with the smallest cleanup slice so far: six files that each surfaced the same single warning for an unused React import. Keeping the batch this focused improves review speed and removes noise without changing behavior or widening the cleanup scope.
Constraint: Limit this pass to single-warning files only so the intent stays obvious
Rejected: Combine this with broader typing or props-alias cleanup | unnecessary scope expansion for an already reviewable one-line pattern
Confidence: high
Scope-risk: narrow
Reversibility: clean
Directive: Keep using ultra-small homogeneous passes whenever the compiler output exposes them; they are cheap to review and easy to revert
Tested: bun run build; bun run smoke; targeted noUnused grep for touched files via bun x tsc --noEmit --noUnusedLocals --noUnusedParameters --pretty false
Not-tested: full repo typecheck (broader baseline noise remains outside this pass)
Co-authored-by: anandh8x <test@example.com>
This third pass continues the issue #314 cleanup series with four very small display-oriented components. The changes only remove unused React imports and reconnect existing Props aliases or parameter types where the files were otherwise surfacing straightforward compiler noise.
Constraint: Keep the pass limited to trivial display components with uniform low-risk cleanup shape
Rejected: Mix in files with unrelated missing-module or broader logic noise | weakens review focus and muddies verification
Confidence: high
Scope-risk: narrow
Reversibility: clean
Directive: Prefer these tiny homogeneous slices while the repo still has wider baseline no-unused noise
Tested: bun run build; bun run smoke; targeted noUnused grep for touched files via bun x tsc --noEmit --noUnusedLocals --noUnusedParameters --pretty false
Not-tested: full repo typecheck (broader baseline noise remains outside this pass)
Co-authored-by: anandh8x <test@example.com>
This follow-up pass continues the phased unused-code cleanup from issue #314 with four dialog components that shared the same low-risk pattern: avoidable unused imports, dormant Props aliases, and untyped callback plumbing that only existed as compiler noise. The changes keep behavior intact while reducing the next layer of cleanup friction.
Constraint: Keep the second pass narrowly scoped and homogeneous so it stays easy to review beside PR #316
Rejected: Fold in EffortCallout and wider component cleanup at the same time | larger surface area and less uniform risk profile
Confidence: high
Scope-risk: narrow
Reversibility: clean
Directive: Continue batching future passes by shared cleanup pattern; leave broader refactors and compatibility placeholders for separate PRs
Tested: bun run build; bun run smoke; targeted noUnused grep for touched files via bun x tsc --noEmit --noUnusedLocals --noUnusedParameters --pretty false
Not-tested: full repo typecheck (broader baseline noise remains outside this pass)
Co-authored-by: anandh8x <test@example.com>
This first cleanup pass removes clearly unused imports and dead locals from a small set of components, and reconnects a few existing Props aliases to their component signatures so they stop surfacing as avoidable noise. The scope stays intentionally narrow to make the follow-up cleanup series easier to review and lower risk.
Constraint: Follow issue #314 with a components-only, low-risk first pass
Rejected: Broader sweep across commands/hooks/utils in the same PR | too much review surface for an initial cleanup pass
Confidence: high
Scope-risk: narrow
Reversibility: clean
Directive: Keep subsequent unused-code cleanups narrowly batched; treat signature/compatibility placeholders separately from straightforward import/alias cleanup
Tested: bun run build; bun run smoke; targeted noUnused grep for touched files via bun x tsc --noEmit --noUnusedLocals --noUnusedParameters --pretty false
Not-tested: full repo typecheck (baseline repo noise remains outside this narrow pass)
Co-authored-by: anandh8x <test@example.com>
This seventh pass continues issue #314 with a two-file PromptInput micro-batch. Both files shared the same single-warning pattern for an unused React import, so the cleanup stays extremely small, behavior-neutral, and easy to review.
Constraint: Keep pass 7 to the exact two-file PromptInput pair with the same warning shape
Rejected: Fold in broader PromptInput cleanup or unrelated warnings | would expand scope beyond a simple micro-pass
Confidence: high
Scope-risk: narrow
Reversibility: clean
Directive: Continue harvesting paired file/test micro-batches when the compiler output exposes them cleanly
Tested: bun run build; bun run smoke; targeted noUnused grep for touched files via bun x tsc --noEmit --noUnusedLocals --noUnusedParameters --pretty false
Not-tested: full repo typecheck (broader baseline noise remains outside this pass)
Co-authored-by: anandh8x <test@example.com>
Three compounding issues caused keyboard input to appear frozen or drop
characters on startup, particularly on Windows CMD/PowerShell and Mac
terminal environments.
Issue 1 — earlyInput disabled (cli.tsx):
The rebrand commit gated startCapturingEarlyInput() behind an opt-in
env flag (OPENCLAUDE_ENABLE_EARLY_INPUT=1), which meant any characters
typed before React finished mounting were silently dropped. Users who
type immediately after launch saw an empty input box with no indication
their keystrokes were lost. Flipped to an opt-out flag
(OPENCLAUDE_DISABLE_EARLY_INPUT=1) so early input capture is on by
default, matching the original upstream behaviour.
Issue 2 — stdin.resume() called before listener attached (App.tsx):
stdin.resume() put the stream into flowing mode before the data/readable
listener was registered. Any input arriving in that gap was queued and
delivered in a burst when the listener connected, which could flood
React's scheduler and stall input processing. Moved resume() to after
the listener is attached so the stream only flows once the handler is
ready.
Issue 3 — AnimatedAsterisk fires ~60 React re-renders in 3s (AnimatedAsterisk.tsx):
The startup screen colour sweep animation runs at 50ms intervals for
3000ms total. Each tick triggers a full re-render of the startup screen
subtree, which competes with stdin event processing in React's microtask
queue. On Windows, where the event loop scheduler is slower, this
reliably caused typing to lag or freeze for the first few seconds after
launch. The animation is now skipped on Windows (process.platform ===
'win32'), showing the icon in its settled state immediately. Mac and
Linux are unaffected.
Closes#228, #220, #205
The login picker previously sent third-party users to a dead-end info screen
that only mentioned env vars. This change reuses the existing provider wizard
from the login flow so first-run setup can continue without requiring slash
command access first.
Constraint: The existing provider setup logic must remain the single source of truth
Rejected: Build a separate third-party auth wizard in ConsoleOAuthFlow | would duplicate provider setup behavior and drift over time
Confidence: high
Scope-risk: moderate
Reversibility: clean
Directive: Keep third-party onboarding routed through ProviderWizard unless the provider command flow is intentionally redesigned
Tested: bun test src/components/ConsoleOAuthFlow.test.tsx src/commands/provider/provider.test.tsx
Tested: tsc --noEmit via project diagnostics
Not-tested: Live gh-authenticated push and PR creation path
Co-authored-by: anandh8x <test@example.com>
Add flickerFreeMode to GlobalConfig so external users can enable
fullscreen alt-screen mode via /config instead of having to set
the CLAUDE_CODE_NO_FLICKER=1 env var manually.
Priority order in isFullscreenEnvEnabled():
CLAUDE_CODE_NO_FLICKER=0 → always off (env wins)
CLAUDE_CODE_NO_FLICKER=1 → always on (env wins)
tmux -CC detected → off (terminal safety guard)
config flickerFreeMode → user preference (new)
USER_TYPE=ant → internal default
The env var still takes full precedence so existing scripts and
automation are unaffected. The new setting only activates when
flickerFreeMode is explicitly set in config.
1. errors.ts: Add getCustomOffSwitchMessage() that returns a
provider-neutral message for 3P users instead of the hardcoded
"Opus is experiencing high load, please use /model to switch to
Sonnet" which is misleading for OpenAI/Gemini/Ollama users.
The original constant is preserved for backward-compatible string
matching in error handlers.
2. Onboarding.tsx: Skip the "approve API key" step when a 3P provider
is active. Previously, having ANTHROPIC_API_KEY in the environment
(e.g., from a previous Anthropic setup) triggered an irrelevant
Anthropic key approval UI even when using Gemini or OpenAI.
- Make getProviderLabel() switch exhaustive with explicit openai/gemini
arms instead of falling through to env-var checks in default
- Add clarifying comment on additionalProperties override in schema
normalization
Partially addresses #39. The cost threshold dialog hardcoded
'Anthropic API' in the title, which is misleading for users on
OpenAI, Gemini, Ollama, or other providers. Now detects the active
provider via getAPIProvider() and shows the correct label.
- Introduced environment variable CLAUDE_CODE_USE_GITHUB to enable GitHub Models.
- Added checks for GITHUB_TOKEN or GH_TOKEN for authentication.
- Updated base URL handling to include GitHub Models default.
- Enhanced provider detection and error handling for GitHub Models.
- Updated relevant functions and components to accommodate the new provider.
Apply the existing ACCENT colour (rgb 240 148 100) to the version
string so it stands out against the dim label, matching the warm
orange used throughout the startup screen for stars and status text.
Requested in #95.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
StartupScreen.ts was reading the version via globalThis['MACRO_DISPLAY_VERSION']
which is never populated — the Bun bundler inlines it as MACRO.DISPLAY_VERSION
(dot notation), not as a globalThis key.
Result: startup screen always showed the hardcoded fallback 'v0.1.4' regardless
of the installed version.
Fix: use MACRO.DISPLAY_VERSION ?? MACRO.VERSION directly, consistent with
cli.tsx, main.tsx, and logoV2Utils.ts.
Fixes#95
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds a new startup screen with filled-block text logo and sunset
gradient, printed to stdout before the Ink UI loads. Removes the
old OPEN box logo from the chat UI since the new screen replaces it.
Changes:
- src/components/StartupScreen.ts (NEW) — gradient OPEN CLAUDE logo
with provider info box (Provider, Model, Endpoint). Auto-detects
active provider from env vars (OpenAI, Gemini, DeepSeek, Ollama,
Groq, Mistral, Azure, LM Studio, Anthropic). Skipped in CI and
non-TTY environments.
- src/entrypoints/cli.tsx — calls printStartupScreen() at startup
before Ink renders
- src/components/Messages.tsx — removes <LogoV2 /> from LogoHeader
so the old OPEN box logo no longer appears in the chat UI
Addresses #55.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The /login platform_setup screen only listed Amazon Bedrock,
Microsoft Foundry, and Vertex AI — OpenAI-compatible providers
and Gemini were completely absent, leaving users with no guidance
on how to use OpenClaude's main feature.
Changes:
- Selector label: "Amazon Bedrock, Microsoft Foundry, or Vertex AI"
→ "OpenAI, Gemini, Bedrock, Ollama, and more"
- Description updated to mention OpenAI-compatible providers and Gemini
- Added OpenAI and Gemini env var instructions to the docs list
Fixes#43 (login screen confusion for Gemini users).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- package.json with all 70+ dependencies
- Bun build script with feature flag shims, native module stubs, otel externals
- Stubs for ~15 missing source files (snapshot gaps)
- tsconfig.json for TypeScript
- bin/openclaude entry point
- Builds to single 19MB dist/cli.mjs
- Verified: --version and --help work
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Squash the current repository state back into one baseline commit while
preserving the README reframing and repository contents.
Constraint: User explicitly requested a single squashed commit with subject "asdf"
Confidence: high
Scope-risk: broad
Reversibility: clean
Directive: This commit intentionally rewrites published history; coordinate before future force-pushes
Tested: git status clean; local history rewritten to one commit; force-pushed main to origin and instructkr
Not-tested: Fresh clone verification after push
